E1 emulator [R0E000010KCE00] (Discontinued product) |
您所在的位置：网站首页 › view of family下载 › E1 emulator [R0E000010KCE00] (Discontinued product) |
|
infoAdditional Details
Specifications
Note that some functions shown here may not be supported under the IDE you use. Performance property and Connection system also vary depending on the MCU type. Item Description Connection system Break function Trace function Memory reference and change while executing the program Performance measurement Hot plug-in See On-chip Debuggers Performance Property (PDF | English, 日本語). On-board programming Supported User interface 14-way cable [7614-6002 (product of 3M Co., Ltd.) and 2514-6002 (product of 3M Limited)] PC Interface USB 2.0, full speed and high speed Target board connection Via attached user I/F cable (Connection signals vary by the target MCU type.) Operating voltage range 1.8V to 5.5V (depends on the target MCU) Power supply from Emulator Supply current: Up to 200mA, Supply voltage: 3.3V or 5V External dimension (Except the protruding parts) 109.4 mm×53.2 mm×18.6 mm Conformance with overseas standards European Standards: EN 55022 Class A, EN 55024 US FCC Standard: FCC part 15 Class A Components E1 Emulator main unit USB cable User's system I/F cable Software CD-ROM Installation guide Self-Checking Program USB driver E1/E20 Emulator User's Manual System Configuration 图像 Optional ProductsFollowing optional products are provided to facilitate the use of the E1 emulators. Please make sure to choose the products that match MCUs you use. Conversion AdapterConverts the number and pitch of the pins in the connector for the connection with the emulator. MCUs RX RL78 RH850 V850 78K R8C 14-Pin to 38-Pin Conversion Adapter for the E1 Emulator R0E000010CKZ00R0E000010CKZ00 User's Manual (14-Pin to 38-Pin Conversion Adapter for E1 Emulator) (PDF | English, 日本語) An adapter for converting the 14-pin/2.54-mm pitch connector on the head of the emulator user interface cable to a 38-pin/0.5-mm pitch connector lens— — — — — 38-Pin Conversion Adapter for the E1 Emulator QB-F14T38V850-01QB-F14T38V850-01 User's Manual (14-Pin to 38-Pin Conversion Adapter for E1 Emulator) (PDF) An adapter for changing to a 14-pin user interface for connection to a Mictor connector mounted on a V850-based target system— — — lens— — Small Connector Conversion Adapter for the E1 Emulator R0E000010CKZ11R0E000010CKZ11 User's Manual (Small Connector Conversion Adapter for E1 Emulator) (PDF | English, 日本語) An adapter for converting the 14-pin/2.54-mm pitch connector on the head of the emulator user interface cable to a 14-pin/1.27-mm pitch connector lens lens lens lens lens lens 14-Pin to 16-Pin Conversion Adapter for the E1 Emulator QB-F14T16-01QB-F14T16-01 User's Manual (14-Pin to 16-Pin Conversion Adapter for E1 Emulator) (PDF) An adapter for changing the 14-pin/2.54-mm pitch connector on the head of the E1 emulator user interface cable to a MINICUBE2-compliant 16-pin/2.54-mm pitch connector— — — lens lens— lens Available | — Not Available Hot-plug AdapterAllows you to connect the emulator without having to turn off the system (Hot Plugin). MCUs RX RL78 RH850 V850 78K R8C Hot-plug Adapter for the E1 Emulator R0E000010ACB00R0E000010ACB00 User's Manual (Hot-plug Adapter for E1 Emulator) Rev.1.01 (PDF | English, 日本語) An adapter that allows connection of an emulator to a running user system without turning the power off lens Note1 lens Note1 lens Note1 lens Note1— — lens Available | — Not Available Note: Refer to On-chip Debuggers Performance Property (PDF | English, 日本語) for the applicable MCU groups. IsolatorEnables debugging in an environment where there is a difference in potential between the user system GND and the host PC GND. MCUs RX RL78 RH850 V850 78K R8C Isolator for the E1 Emulator R0E000010ACB10R0E000010ACB10 User's Manual (Isolator for E1 Emulator) (PDF | English, 日本語) (For the RX or the R8C family) lens— — — — lens Isolator for the E1 Emulator R0E000010ACB20R0E000010ACB20 User's Manual (Isolator for E1 Emulator) (PDF | English, 日本語) (For the RL78 or the RH850 family)— lens lens— — — lens Available | — Not Available Low voltage OCD BoardEnables you to debug the target MCU, even if the adapter voltage is not high enough to reprogram internal Flash ROM. This product is used between the emulator and a user's system, and is united by the in-circuit connection with the user's system. MCUs RL78/G10 Low voltage OCD Board for RL78/G10 (10-pin/16-pin) R0E510Y47LVB00Low voltage OCD Board for RL78/G10 (10pin, 16pin) Rev.1.00 (PDF | English, 日本語) An OCD board for debugging an RL78/G10 MCU (10-pin or 16-pin) with an adapter voltage below 4.5 V lenslens Available | — Not Available Debug MCU BoardEnables the in-circuit connection of the emulator with the user's system. This board allows you to use enhanced debugging functions. The applicable debugging function varies depending on the MCU type. MCUs RH850 Debug MCU Board for RH850 Supported devices for Debug MCU Board for RH850 Family [On-chip Debugger] (PDF | English, 日本語) This board enables use of the trace function even if the target MCU does not have a trace function. The Debug MCU Board is for use in combination with a separately available 176-pin (with internal trace function) MCU of the RH850/F1L group.Note: The package of the Debug MCU Board does not include the MCU. Please purchase it separately. For details, contact either a Renesas Electronics Corporation representative (responsible for sales) or distributor. lenslens Available | — Not Available System configuration 图像 Design SupportE1 emulator [R0E000010KCE00] Information for Users Information on the discontinuation of E1 emulator production and on its successor productsWe have already discontinued production of the E1 emulator due to components of the product having reached their EOL (end of life, i.e. end of production). Please click on the following link to confirm the details and our successor products. >> Tool News: [Notification] End of Life (EOL) Notice for E1 Emulator (PDF | English, 日本語) |
今日新闻 |
推荐新闻 |
| CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |